澳门威尼斯app下载-威澳门尼斯36366com

Hello, welcome to visit Suzhou Yiqiang Laser!
激光切割机

How often does the laser cutting machine need to change the circulating water (Suzhou laser cutting machine)

Your current location: Home >> News >> Company news

How often does the laser cutting machine need to change the circulating water (Suzhou laser cutting machine)

2019-05-22
times

If you are using a common water cooling device (water pump), we recommend replacing the water in the bucket and circulating water once a week

The quality and water temperature of circulating water directly affect the service life of laser. It is recommended to use pure water and control the water temperature below 35 ℃. If the temperature is over 35 ℃, the circulating water shall be replaced, or ice shall be added to the water to reduce the water temperature. If you need to process for a long time (more than 8 hours a day) or you are using a laser tube of more than 80W, it is recommended that you use an industrial water cooler, which can greatly increase the service life of the laser tube.

Suzhou Yiqiang laser is committed to the R & D and production of laser machine, high quality and first-class service is our consistent purpose.

Be careful:

1. Make sure that the laser is filled with circulating water before the machine works.

2. If the chiller is used, make sure that the water of the chiller is full.


URL of this article: /en/news/403.html

Recently Viewed:

Related Products

related news

contact us

Mobile: 18662113123

Tel: 0512-63988785

Website: www.szyqtech.com

Address: No.159, Qingyang Road, 

               Wujiang District, Suzhou

WeChat customer service
Official website of mobile phone

澳门威尼斯app下载|威澳门尼斯36366com

XML 地图 | Sitemap 地图